Wednesday, December 15, 2010

Activated Carbon Filter

Activated Carbon Filter

Highly absorbent carbon obtained by heating granulated charcoal to exhaust contained gases, resulting in a highly porous form with a very large surface area. It is used primarily for purifying gases by adsorption, solvent recovery, or deodorization and as an antidote to certain poisons. Also called activated carbon

Activated Carbon Filter

Activated Carbon Filter(ACF) is a natural material derived from bituminous coal, lignite, wood, coconut shell etc., activated by steam and other means, and each one have different adsorption properties (e.g. bituminous carbon for high chlorine reduction capacity). We also use various blends of carbon to achieve specific water quality and contaminants reduction (e.g. coconut shell carbon for "sweet taste").

Rapid Gravity Sand Filters

The rapid gravity sand filter is a type of filter commonly used in municipal water treatment facilities. Rapid sand filters use relatively coarse sand and other granular media to remove particles and impurities that have been trapped in a floc through the use of flocculation chemicals - typically salts of aluminium or iron. Water and flocs flows through the filter medium under gravity pressure and the flocculated material are trapped in the sand matrix.

Rapid filters are usually built open with the water passing down the filter but by gravity. It has a filter rate of 4 – 8 m3/m2/hr. The tank is made of concrete with a depth of 3.0 to 3.5m. Coarse sand of size 0.4 to 1.5mm is used as the filter medium.

Screen Filter

This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read our FAQ page at fivefilters.org/content-only/faq.php
Five Filters featured site: So, Why is Wikileaks a Good Thing Again?.


View the original article here

No comments:

Post a Comment